Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 337

Managed Switch CLI Manual, Release 8.0.3 show ip rip This command displays information relevant to the RIP router. Format Modes show ip rip • Privileged EXEC • User EXEC Term Definition RIP Admin Mode Enable or disable. Split Horizon Mode Auto Summary Mode Host Routes Accept Mode None, simple or poison reverse. Enable or disable. If enabled, groups of adjacent routes are summarized into single entries, in order to reduce the total number of entries The default is enable. Enable or disable. If enabled the router accepts host routes. The default is enable. Global Route Changes Global queries The number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age. The number of responses sent to RIP queries from other systems. Default Metric Default Route Advertise The default metric of redistributed routes if one has already been set, or blank if not configured earlier. The valid values are 1 to 15. The default route. show ip rip interface brief This command displays general information for each RIP interface. For this command to display successful results routing must be enabled per interface (i.e., ip rip). Format Modes show ip rip interface brief • Privileged EXEC • User EXEC Term Interface IP Address Send Version Definition Valid unit, slot, and port number separated by forward slashes. The IP source address used by the specified RIP interface. The RIP version(s) used when sending updates on the specified interface. The types are none, RIP-1, RIP-1c, RIP-2 Routing Commands v1.0, July 2010 4-89