Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 223

Managed Switch CLI Manual, Release 8.0.3 TLV Codes: 0- Capabilities, 1- Network Policy 2- Location, 3- Extended PSE 4- Extended Pd, 5- Inventory --More-- or (q)uit (Switch) #show lldp med interface 1/0/2 Interface Link configMED operMED ConfigNotify TLVsTx 1/0/2 Up Disabled Disabled Disabled 0,1 TLV Codes: 0- Capabilities, 2- Location, 4- Extended Pd, 1- Network Policy 3- Extended PSE 5- Inventory (Routing) # show lldp med local-device detail This command displays detailed information about the LLDP data a specific interface transmits. Format Mode show lldp med local-device detail Privileged EXEC Term Media Application Type Vlan ID Priority DSCP Unknown Tagged Hardware Rev Firmware Rev Software Rev Serial Num Mfg Name Model Name Definition Shows the application type. Types are unknown, voice, voicesignaling, guestvoice, guestvoicesignaling, sfotphonevoice, videoconferencing, streamingvideo, videosignaling. Shows the VLAN id associated with a particular policy type Shows the priority associated with a particular policy type. Shows the DSCP associated with a particular policy type. Indicates if the policy type is unknown. In this case, the VLAN ID, Priority and DSCP are ignored. Indicates if the policy type is using tagged or untagged VLAN. Shows the local hardware version. Shows the local firmware version. Shows the local software version. Shows the local serial number. Shows the manufacture name. Shows the model name. Switching Commands v1.0, July 2010 3-187