Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 302

Managed Switch CLI Manual, Release 8.0.3 distance ospf (OSPF) This command sets the route preference value of OSPF in the router. Lower route preference values are preferred when determining the best route. The type of OSPF route can be intra, inter, or external. All the external type routes are given the same preference value. The range of value is 1 to 255. Default Format Mode 110 distance ospf {intra-area | inter-area | external } Router OSPF Config no distance ospf This command sets the default route preference value of OSPF routes in the router. The type of OSPF can be intra, inter, or external. All the external type routes are given the same preference value. Format Mode no distance ospf {intra-area | inter-area | external} Router OSPF Config distribute-list out (OSPF) Use this command to specify the access list to filter routes received from the source protocol. Format Mode distribute-list out {rip | static | connected} Router OSPF Config no distribute-list out Use this command to specify the access list to filter routes received from the source protocol. Format Mode no distribute-list out {rip | static | connected} Router OSPF Config Routing Commands v1.0, July 2010 4-54