Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 467

Managed Switch CLI Manual, Release 8.0.3 Term Source Metric Metric Type Tag Subnets Distribute-List Definition Shows source protocol/routes that are being redistributed. Possible values are static, connected, BGP, or RIP. The metric of the routes being redistributed. Shows whether the routes are External Type 1 or External Type 2. The decimal value attached to each external route. For redistributing routes into OSPF, the scope of redistribution for the specified protocol. The access list used to filter redistributed routes. show ipv6 ospf abr This command displays the internal OSPFv3 routes to reach Area Border Routers (ABR). This command takes no options. Format Modes show ipv6 ospf abr • Privileged EXEC • User EXEC Term Type Router ID Cost Area ID Next Hop Next Hop Intf Definition The type of the route to the destination. It can be either: • intra - Intra-area route • inter - Inter-area route Router ID of the destination. Cost of using this route. The area ID of the area from which this route is learned. Next hop toward the destination. The outgoing router interface to use when forwarding traffic to the next hop. show ipv6 ospf area This command displays information about the area. The identifies the OSPF area that is being displayed. IPv6 Commands v1.0, July 2010 7-57