Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 277

Managed Switch CLI Manual, Release 8.0.3 no ip vrrp priority This command sets the default priority value for the virtual router configured on a specified interface. Format Mode no ip vrrp priority Interface Config ip vrrp timers advertise This command sets the frequency, in seconds, that an interface on the specified virtual router sends a virtual router advertisement. Default Format Mode 1 ip vrrp timers advertise Interface Config no ip vrrp timers advertise This command sets the default virtual router advertisement value for an interface. Format Mode no ip vrrp timers advertise Interface Config ip vrrp track interface Use this command to alter the priority of the VRRP router based on the availability of its interfaces. This command is useful for tracking interfaces that are not configured for VRRP. Only IP interfaces are tracked. A tracked interface is up if the IP on that interface is up. Otherwise, the tracked interface is down. When the tracked interface is down or the interface has been removed from the router, the priority of the VRRP router will be decremented by the value specified in the argument. When the interface is up for IP protocol, the priority will be incremented by the value. A VRRP configured interface can track more than one interface. When a tracked interface goes down, then the priority of the router will be decreased by 10 (the default priority decrement) for each downed interface. The default priority decrement is changed using the argument. Routing Commands v1.0, July 2010 4-29