Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 329

Managed Switch CLI Manual, Release 8.0.3 Term Definition Metric Val The metric value is applied based on the TOS. It defaults to the least metric of the type of service among the interfaces to other areas. The OSPF cost for a route is a function of the metric value. Import Summary Controls the import of summary LSAs into stub areas. LSA show ip ospf virtual-link This command displays the OSPF Virtual Interface information for a specific area and neighbor. The parameter identifies the area and the parameter identifies the neighbor's Router ID. Format Modes show ip ospf virtual-link • Privileged EXEC • User EXEC Term Definition Area ID The area id of the requested OSPF area. Neighbor Router The input neighbor Router ID. ID Hello Interval Dead Interval Iftransit Delay Interval Retransmit Interval The configured hello interval for the OSPF virtual interface. The configured dead interval for the OSPF virtual interface. The configured transit delay for the OSPF virtual interface. The configured retransmit interval for the OSPF virtual interface. Authentication Type State Neighbor State The configured authentication type of the OSPF virtual interface. The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router, and backup designated router. This is the state of the OSPF interface. The neighbor state. Routing Commands v1.0, July 2010 4-81