Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 21

Managed Switch CLI Manual, Release 8.0.3 Table 6. CLI Mode Access and Exit (continued) Command Mode Access Method Exit or Access Previous Mode TACACS Config From the Global Config mode, enter tacacs-server host , where is the IP address of the TACACS server on your network. To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter CtrlZ. DHCP Pool Config DHCPv6 Pool Config From the Global Config mode, enter ip dhcp pool . To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter CtrlZ. From the Global Config mode, To exit to the Global Config mode, enter exit. To enter return to the Privileged EXEC mode, enter Ctrl- ip dhcpv6 pool . Z. Stack Global Config Mode From the Global Config mode, enter the stack command. ARP Access-List Config Mode From the Global Config mode, enter the arp access-list command. To exit to the Global Config mode, enter the exit command. To return to the Privileged EXEC mode, enter Ctrl-Z. To exit to the Global Config mode, enter the exit command. To return to the Privileged EXEC mode, enter Ctrl-Z. Command Completion and Abbreviation Command completion finishes spelling the command when you type enough letters of a command to uniquely identify the command keyword. Once you have entered enough letters, press the SPACEBAR or TAB key to complete the word. Command abbreviation allows you to execute a command when you have entered there are enough letters to uniquely identify the command. You must enter all of the required keywords and parameters before you enter the command. CLI Error Messages If you enter a command and the system is unable to execute it, an error message appears. Table 7 describes the most common CLI error messages. Using the Command-Line Interface 1-9 v1.0, July 2010