Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 473

Managed Switch CLI Manual, Release 8.0.3 Format Modes show ipv6 ospf interface brief • Privileged EXEC • User EXEC Term Definition Interface Admin Mode Area ID Router Priority Hello Interval Dead Interval Retransmit Interval Retransmit Delay Interval LSA Ack Interval Valid unit, slot, and port number separated by forward slashes. States whether OSPF is enabled or disabled on a router interface. The OSPF Area ID for the specified interface. The router priority. The router priority determines which router is the designated router. The frequency, in seconds, at which the interface sends Hello packets. The amount of time, in seconds, the interface waits before assuming a neighbor is down. The frequency, in seconds, at which the interface sends LSA. The number of seconds the interface adds to the age of LSA packets before transmission. The amount of time, in seconds, the interface waits before sending an LSA acknowledgement after receiving an LSA. show ipv6 ospf interface stats This command displays the statistics for a specific interface. The command only displays information if OSPF is enabled. Format Modes show ipv6 ospf interface stats • Privileged EXEC • User EXEC Term Definition OSPFv3 Area ID The area id of this OSPF interface. IPv6 Address The IP address associated with this OSPF interface. OSPFv3 The number of times the specified OSPF interface has changed its state, or an error has Interface Events occurred. IPv6 Commands v1.0, July 2010 7-63