Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 318

Managed Switch CLI Manual, Release 8.0.3 Term Definition Area LSA Checksum A number representing the Area LSA Checksum for the specified AreaID excluding the external (LS type 5) link-state advertisements. Import Summary Shows whether to import summary LSAs. LSAs OSPF Stub Metric Value The metric value of the stub area. This field displays only if the area is a configured as a stub area. The following OSPF NSSA specific information displays only if the area is configured as an NSSA: Term Definition Import Summary Shows whether to import summary LSAs into the NSSA. LSAs Redistribute into Shows whether to redistribute information into the NSSA. NSSA Default Information Originate Shows whether to advertise a default route into the NSSA. Default Metric Default Metric Type The metric value for the default route advertised into the NSSA. The metric type for the default route advertised into the NSSA. Translator Role The NSSA translator role of the ABR, which is always or candidate. Translator The amount of time that an elected translator continues to perform its duties after it Stability Interval determines that its translator status has been deposed by another router. Translator State Shows whether the ABR translator state is disabled, always, or elected. show ip ospf asbr This command displays the internal OSPF routing table entries to Autonomous System Boundary Routers (ASBR). This command takes no options. Format Mode show ip ospf asbr • Privileged EXEC • User EXEC Routing Commands v1.0, July 2010 4-70