Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 325

Managed Switch CLI Manual, Release 8.0.3 Packet Type LS Request LS Update LS Acknowledgment Sent 1 141 40 Received 1 42 135 show ip ospf neighbor This command displays information about OSPF neighbors. If you do not specify a neighbor IP address, the output displays summary information in a table. If you specify an interface or tunnel, only the information for that interface or tunnel displays. The is the IP address of the neighbor, and when you specify this, detailed information about the neighbor displays. The information below only displays if OSPF is enabled and the interface has a neighbor. Format Modes show ip ospf neighbor [interface ] [] • Privileged EXEC • User EXEC If you do not specify an IP address, a table with the following columns displays for all neighbors or the neighbor associated with the interface that you specify: Term Router ID Priority IP Address Neighbor Interface Definition The 4-digit dotted-decimal number of the neighbor router. The OSPF priority for the specified interface. The priority of an interface is a priority integer from 0 to 255. A value of '0' indicates that the router is not eligible to become the designated router on this network. The IP address of the neighbor. The interface of the local router in unit/slot/port format. Routing Commands v1.0, July 2010 4-77