Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 347

Managed Switch CLI Manual, Release 8.0.3 Term Source IP Group IP Protocol Incoming Interface Outgoing Interface List Definition The IP address of the multicast data source. The IP address of the destination of the multicast packet. The multicast routing protocol by which this entry was created. The interface on which the packet for this group arrives. The list of outgoing interfaces on which this packet is forwarded. show ip mcast mroute source This command displays the multicast configuration settings such as flags, timer settings, incoming and outgoing interfaces, RPF neighboring routers, and expiration times of all the entries in the multicast mroute table containing the given source IP address or source IP address and group IP address pair. Format Modes show ip mcast mroute source {summary | detail} • Privileged EXEC • User EXEC If you use the detail parameter, the command displays the following column headings in the output table: Term Source IP Group IP Expiry Time Up Time RPF Neighbor Flags Definition The IP address of the multicast data source. The IP address of the destination of the multicast packet. The time of expiry of this entry in seconds. The time elapsed since the entry was created in seconds. The IP address of the RPF neighbor. The flags associated with this entry. If you use the summary parameter, the command displays the following column headings in the output table: Term Source IP Group IP Definition The IP address of the multicast data source. The IP address of the destination of the multicast packet. IP Multicast Commands 5-6 v1.0, July 2010