Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 205

Managed Switch CLI Manual, Release 8.0.3 port-security mac-address move This command converts dynamically locked MAC addresses to statically locked addresses. Format Mode port-security mac-address move Interface Config show port-security This command displays the port-security settings. If you do not use a parameter, the command displays the settings for the entire system. Use the optional parameters to display the settings on a specific interface or on all interfaces. Format Mode show port-security [{ | all}] Privileged EXEC Term Admin Mode Definition Port Locking mode for the entire system. This field displays if you do not supply any parameters. For each interface, or for the interface you specify, the following information appears: Term Admin Mode Dynamic Limit Static Limit Violation Trap Mode Definition Port Locking mode for the Interface. Maximum dynamically allocated MAC Addresses. Maximum statically allocated MAC Addresses. Whether violation traps are enabled. show port-security dynamic This command displays the dynamically locked MAC addresses for the port. Format Mode show port-security dynamic Privileged EXEC Switching Commands v1.0, July 2010 3-169