Netgear M4100-D10-POE CLI Manual - Page 138
show ip dhcp snooping database
View all Netgear M4100-D10-POE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
ProSafe M4100 and M7100 Managed Switches show ip dhcp snooping database Use this command to display the DHCP Snooping configuration related to the database persistency. Format Mode show ip dhcp snooping database • Privileged EXEC • User EXEC Term Agent URL Write Delay Definition Bindings database agent URL. The maximum write time to write the database into local or remote. Example: The following shows example CLI display output for the command. (switch) #show ip dhcp snooping database agent url: /10.131.13.79:/sai1.txt write-delay: 5000 show ip dhcp snooping interfaces Use this command to show the DHCP Snooping status of the interfaces. Format Mode show ip dhcp snooping interfaces Privileged EXEC show ip dhcp snooping statistics Use this command to list statistics for DHCP Snooping security violations on untrusted ports. Format Mode show ip dhcp snooping statistics • Privileged EXEC • User EXEC Term Interface MAC Verify Failures Definition The IP address of the interface in slot/port format. Represents the number of DHCP messages that were filtered on an untrusted interface because of source MAC address and client HW address mismatch. Switching Commands 138