Netgear M4100-D10-POE CLI Manual - Page 717

ProSafe M4100 and M7100 Managed Switches Table 20. User_Manager Log Messages Component Message User_Manager User Login Failed for XXXX User_Manager Access level for user XXXX could not be determined. Setting to READ_ONLY. User_Manager Could not migrate config file XXXX from version YYYY to ZZZZ. Using defaults. Cause Failed to authenticate user login. XXXX indicates the user name to be authenticated. Invalid access level specified for the user. The access level is set to READ_ONLY. XXXX indicates the user name. Failed to migrate the config file. XXXX is the config file name. YYYY is the old version number and ZZZZ is the new version number. Switching Table 21. Protected Ports Log Messages Component Message Cause Protected Ports Protected Port: failed to save configuration Appears when the protected port configuration cannot be saved Protected Ports protectedPortCnfgrInitPhase1Process: Appears when protectedPortCfgRWLock Unable to create r/w lock for protectedPort Fails Protected Ports protectedPortCnfgrInitPhase2Process: Unable to register for VLAN change callback Appears when nimRegisterIntfChange with VLAN fails Protected Ports Cannot add intIfNum xxx to group yyy Appears when an interface could not be added to a particular group. Protected Ports Unable to set protected port group Appears when a dtl call fails to add interface mask at the driver level Protected Ports Cannot delete intIfNum xxx from group yyy Appears when a dtl call to delete an interface from a group fails Protected Ports Cannot update group YYY after deleting interface XXX This message appears when an update group for an interface deletion fails Protected Ports Received an interface change callback while not ready to receive it Appears when an interface change callback has come before the protected port component is ready. Log Messages 717