Netgear M4100-D10-POE CLI Manual - Page 217
mvr type, mvr vlan group, show mvr, no mvr vlan
View all Netgear M4100-D10-POE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
ProSafe M4100 and M7100 Managed Switches mvr type This command sets the MVR port type. When a port is set as source, it is the port to which the multicast traffic flows using the multicast VLAN. When a port is set to receiver, it is the port where a listening host is connected to the switch. Format Mode Default mvr type { receiver|source } Interface Config none no mvr type Use this command to set the MVR port type to none. Format Mode no mvr type Interface Config mvr vlan group Use this command to include the port in the specific MVR group. is the multicast VLAN, and is the IP multicast group Format Mode mvr vlan group Interface Config no mvr vlan Use this command to exclude the port from the specific MVR group. Format Mode no mvr vlan group Interface Config show mvr This command displays global MVR settings. Format Mode show mvr Privileged EXEC Multicast VLAN Registration (MVR) 217