Netgear M4100-D10-POE CLI Manual - Page 275

ProSafe M4100 and M7100 Managed Switches Format Mode clear ip ospf stub-router Privileged EXEC default-information originate (OSPF) This command is used to control the advertisement of default routes. Default Format Mode • metric-unspecified • type-2 default-information originate [always] [metric ] [metric-type {1 | 2}] Router OSPF Config no default-information originate (OSPF) This command is used to control the advertisement of default routes. Format Mode no default-information originate [metric] [metric-type] Router OSPF Config default-metric (OSPF) This command is used to set a default for the metric of distributed routes. Format Mode default-metric Router OSPF Config no default-metric (OSPF) This command is used to set a default for the metric of distributed routes. Format Mode no default-metric Router OSPF Config distance ospf (OSPF) This command sets the route preference value of OSPF in the router. Lower route preference values are preferred when determining the best route. The type of OSPF route can be intra, inter, or external. All the external type routes are given the same preference value. The range of value is 1-255. Default 110 Routing Commands 275