Netgear M4100-D10-POE CLI Manual - Page 573
show ip dhcp binding, show ip dhcp global configuration, Format, Modes, IP address, Hardware, Lease
View all Netgear M4100-D10-POE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 573 highlights
ProSafe M4100 and M7100 Managed Switches show ip dhcp binding This command displays address bindings for the specific IP address on the DHCP server. If no IP address is specified, the bindings corresponding to all the addresses are displayed. Format Modes show ip dhcp binding [] • Privileged EXEC • User EXEC Term IP address Hardware Address Lease expiration Type Definition The IP address of the client. The MAC Address or the client identifier. The lease expiration time of the IP address assigned to the client. The manner in which IP address was assigned to the client. show ip dhcp global configuration This command displays address bindings for the specific IP address on the DHCP server. If no IP address is specified, the bindings corresponding to all the addresses are displayed. Format Modes show ip dhcp global configuration • Privileged EXEC • User EXEC Term Definition Service DHCP The field to display the status of dhcp protocol. Number of Ping The maximum number of Ping Packets that will be sent to verify that an ip address id not Packets already assigned. Conflict Logging Shows whether conflict logging is enabled or disabled. BootP Automatic Shows whether BootP for dynamic pools is enabled or disabled. show ip dhcp pool configuration This command displays pool configuration. If all is specified, configuration for all the pools is displayed. Format Modes show ip dhcp pool configuration { | all} • Privileged EXEC • User EXEC Utility Commands 573