Netgear M4100-D10-POE CLI Manual - Page 244
Router Discovery Protocol Commands, show ip stats, show routing heap summary
View all Netgear M4100-D10-POE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
ProSafe M4100 and M7100 Managed Switches show ip stats This command displays IP statistical information. Refer to RFC 1213 for more information about the fields that are displayed. Format Modes show ip stats • Privileged EXEC • User EXEC show routing heap summary This command displays a summary of the memory allocation from the routing heap. The routing heap is a chunk of memory set aside when the system boots for use by the routing applications. Format Mode show routing heap summary Privileged EXEC Parameter Description Heap Size The amount of memory, in bytes, allocated at startup for the routing heap. Memory In Use The number of bytes currently allocated. Memory on Free List The number of bytes currently on the free list. When a chunk of memory from the routing heap is freed, it is placed on a free list for future reuse. Memory Available The number of bytes in the original heap that have never been allocated. in Heap In Use High Water The maximum memory in use since the system last rebooted. Mark The following shows example CLI display output for the command. (netgear switch) #show routing heap summary Heap Size 92594000 bytes Memory In Use 149598 bytes (0%) Memory on Free List 78721 bytes (0%) Memory Available in Heap........ 92365249 bytes (99%) In Use High Water Mark.......... 210788 bytes (0%) Router Discovery Protocol Commands This section describes the commands you use to view and configure Router Discovery Protocol settings on the switch. The Router Discovery Protocol enables a host to discover the IP address of routers on the subnet. Routing Commands 244