Netgear M4100-D10-POE CLI Manual - Page 567
lease, network DHCP Pool Config, bootfile
View all Netgear M4100-D10-POE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 567 highlights
ProSafe M4100 and M7100 Managed Switches lease This command configures the duration of the lease for an IP address that is assigned from a DHCP server to a DHCP client. The overall lease time should be between 1-86400 minutes. If you specify infinite, the lease is set for 60 days. You can also specify a lease duration. Days is an integer from 0 to 59. Hours is an integer from 0 to 23. Minutes is an integer from 0 to 59. Default Format Mode 1 (day) lease [{ [] [] | infinite}] DHCP Pool Config no lease This command restores the default value of the lease time for DHCP Server. Format Mode no lease DHCP Pool Config network (DHCP Pool Config) Use this command to configure the subnet number and mask for a DHCP address pool on the server. Network-number is a valid IP address, made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the specified address pool. The prefix-length is an integer from 0 to 32. Default Format Mode none network [{ | }] DHCP Pool Config no network This command removes the subnet number and mask. Format Mode no network DHCP Pool Config bootfile The command specifies the name of the default boot image for a DHCP client. The specifies the boot image file. Format Mode bootfile DHCP Pool Config Utility Commands 567