Netgear M4100-D10-POE CLI Manual - Page 568
This command con s NetBIOS Windows Internet Naming Service WINS name servers
View all Netgear M4100-D10-POE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 568 highlights
ProSafe M4100 and M7100 Managed Switches no bootfile This command deletes the boot image name. Format Mode no bootfile DHCP Pool Config domain-name This command specifies the domain name for a DHCP client. The specifies the domain name string of the client. Default Format Mode none domain-name DHCP Pool Config no domain-name This command removes the domain name. Format Mode no domain-name DHCP Pool Config netbios-name-server This command configures NetBIOS Windows Internet Naming Service (WINS) name servers that are available to DHCP clients. One IP address is required, although one can specify up to eight addresses in one command line. Servers are listed in order of preference (address1 is the most preferred server, address2 is the next most preferred server, and so on). Default Format Mode none netbios-name-server [...] DHCP Pool Config no netbios-name-server This command removes the NetBIOS name server list. Format Mode no netbios-name-server DHCP Pool Config Utility Commands 568