Netgear M4100-D10-POE CLI Manual - Page 144
arp access-list, permit ip host mac host, show ip arp inspection, no ip arp inspection filter
View all Netgear M4100-D10-POE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
ProSafe M4100 and M7100 Managed Switches no ip arp inspection filter Use this command to unconfigure the ARP ACL used to filter invalid ARP packets on a list of comma-separated VLAN ranges. Format Mode no ip arp inspection filter acl-name vlan vlan-list [static] Global Config arp access-list Use this command to create an ARP ACL. Format Mode arp access-list acl-name Global Config no arp access-list Use this command to delete a configured ARP ACL. Format Mode no arp access-list acl-name Global Config permit ip host mac host Use this command to configure a rule for a valid IP address and MAC address combination used in ARP packet validation. Format Mode permit ip host sender-ip mac host sender-mac ARP Access-list Config no permit ip host mac host Use this command to delete a rule for a valid IP and MAC combination. Format Mode no permit ip host sender-ip mac host sender-mac ARP Access-list Config show ip arp inspection Use this command to display the Dynamic ARP Inspection global configuration and configuration on all the VLANs. With the vlan-list argument (that is, comma-separated VLAN ranges), the command displays the global configuration and configuration on all the VLANs in Switching Commands 144