Netgear M4100-D10-POE CLI Manual - Page 189

ProSafe M4100 and M7100 Managed Switches 0/13 Down Disabled Disabled Disabled 0,1 0/14 Down Disabled Disabled Disabled 0,1 TLV Codes: 0- Capabilities, 1- Network Policy 2- Location, 3- Extended PSE 4- Extended Pd, 5- Inventory --More-- or (q)uit (Switch) #show lldp med interface 0/2 Interface Link configMED operMED ConfigNotify TLVsTx 0/2 Up Disabled Disabled Disabled 0,1 TLV Codes: 0- Capabilities, 2- Location, 4- Extended Pd, 1- Network Policy 3- Extended PSE 5- Inventory (Routing) # show lldp med local-device detail This command displays detailed information about the LLDP data a specific interface transmits. Format Mode show lldp med local-device detail Privileged EXEC Term Media Application Type Vlan ID Priority DSCP Unknown Tagged Hardware Rev Firmware Rev Software Rev Serial Num Mfg Name Model Name Definition Shows the application type. Types are unknown, voice, voicesignaling, guestvoice, guestvoicesignaling, sfotphonevoice, videoconferencing, streamingvideo, videosignaling. Shows the VLAN id associated with a particular policy type Shows the priority associated with a particular policy type. Shows the DSCP associated with a particular policy type. Indicates if the policy type is unknown. In this case, the VLAN ID, Priority and DSCP are ignored. Indicates if the policy type is using tagged or untagged VLAN. Shows the local hardware version. Shows the local firmware version. Shows the local software version. Shows the local serial number. Shows the manufacture name. Shows the model name. Example: The following shows example CLI display output for the command. Switching Commands 189