Netgear M4100-D10-POE CLI Manual - Page 316
split-horizon, redistribute RIP, no redistribute
View all Netgear M4100-D10-POE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
ProSafe M4100 and M7100 Managed Switches split-horizon This command sets the RIP split horizon mode. Split horizon is a technique for avoiding problems caused by including routes in updates sent to the router from which the route was originally learned. The options are: None - no special processing for this case. Simple - a route will not be included in updates sent to the router from which it was learned. Poisoned reverse - a route will be included in updates sent to the router from which it was learned, but the metric will be set to infinity. Default Format Mode simple split-horizon {none | simple | poison} Router RIP Config no split-horizon This command sets the default RIP split horizon mode. Format Mode no split-horizon Router RIP Config redistribute (RIP) This command configures RIP protocol to redistribute routes from the specified source protocol/routers. There are five possible match options. When you submit the command redistribute ospf match the match-type or types specified are added to any match types presently being redistributed. Internal routes are redistributed by default. Default • metric-not-configured • match-internal Format for OSPF as source protocol redistribute ospf [metric ] [match [internal] [external 1] [external 2] [nssa-external 1] [nssa-external-2]] Format for redistribute {static | connected} [metric ] other source protocol Mode Router RIP Config no redistribute This command de-configures RIP protocol to redistribute routes from the specified source protocol/routers. Format Mode no redistribute {ospf | static | connected} [metric] [match [internal] [external 1] [external 2] [nssa-external 1] [nssa-external-2]] Router RIP Config Routing Commands 316