Netgear R6200 User Manual - Page 76
ADVANCED > Advanced Setup > Port Forwarding/Port Triggering, Disable Port Triggering
View all Netgear R6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
R6200v2 Smart WiFi Router can usually determine this information by contacting the publisher of the application or user groups or news groups. To enable port triggering: 1. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. 2. Select the Port Triggering radio button. 3. Clear the Disable Port Triggering check box. Note: If the Disable Port Triggering check box is selected after you configure port triggering, port triggering is disabled. However, any port triggering configuration information you added to the router is retained even though it is not used. 4. In the Port Triggering Time-out field, enter a value up to 9999 minutes. This value controls the inactivity timer for the designated inbound ports. The inbound ports close when the inactivity time expires. The time-out value is required so that the router can determine when the application has terminated. To add a port triggering service: 1. On the Port Forwarding/Port Triggering screen, click the Add Service button. Security 76