Netgear R6200 User Manual - Page 93
Wireless Access Point, ADVANCED > Advanced Setup > Wireless Settings - access point setup
View all Netgear R6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
R6200v2 Smart WiFi Router 5. Click the Add button. The screen changes back to the list screen. 6. Add each computer or device you want to allow to connect wirelessly. 7. Select the Turn Access Control On check box. 8. Click the Apply button. To edit a wireless device or delete it from the access list: 1. Select ADVANCED > Advanced Setup > Wireless Settings. The Advanced Wireless Settings screen displays. 2. In the table, select the radio button next to the wireless device that you want to edit or delete. 3. Do one of the following: • Click the Edit button. The Edit Wireless Card screen displays. a. Edit the address information. b. Click the Accept button. • Click the Delete button. The address is removed from the table. Wireless Access Point You can set up the router to run as an access point (AP) on the same local network as another router. To set up the router as an AP: 1. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the other router. Cable this port to a LAN port on the other router 2. Select ADVANCED > Advanced Setup > Wireless Settings. 3. Select the Enable Access Point Mode check box. Advanced Settings 93