Netgear R6900P User Manual - Page 131
Set Up a Bridge for a Port Group, To con a port group and enable the bridge
View all Netgear R6900P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Nighthawk AC1900 Smart WiFi Router Model R6900P the ISP's network directly, you can enable the bridge between the device and the router's Internet port or add new VLAN tag groups to the bridge. Note If your ISP provides directions on how to set up a bridge for IPTV and Internet service, follow those directions. Set Up a Bridge for a Port Group If the devices that are connected to the router's Ethernet LAN port or WiFi network include an IPTV device, your ISP might require you to set up a bridge for a port group for the router's Internet interface. A bridge with a port group prevents packets that are sent between the IPTV device and the router's Internet port from being processed through the router's Network Address Translation (NAT) service. To configure a port group and enable the bridge: 1. Launch a web browser from a computer or mobile device that is connected to the network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > VLAN/Bridge Settings. The VLAN / Bridge Settings page displays. 5. Select the Enable VLAN/Bridge Setup check box. The page expands. 6. Select the By bridge group radio button. 7. Select a Wired Ports check box or a Wireless check box. Manage the WAN and LAN Network Settings 131