Netgear R6900P User Manual - Page 191
Manage Port Forwarding and Port Triggering, Nighthawk AC1900 Smart WiFi Router Model R6900P
View all Netgear R6900P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Nighthawk AC1900 Smart WiFi Router Model R6900P 7. Click the Add Custom Service button. 8. Specify a new port forwarding rule with a custom service or application as described in the following table. Field Description Service Name Enter the name of the custom service or application. Service Type Select the protocol (TCP or UDP) that is associated with the service or application. If you are unsure, select TCP/UDP. External Starting Port Enter the starting port number for the service or application. External Ending Port If the service or application uses a single port, enter the same port number in the External Ending Port field. If the service or application uses a range of ports, enter the ending port number of the range in the External Ending Port field. Internal port range Specify the internal ports by one of these methods: • Leave the Use the same port range for Internal port check box selected. • In the Internal Starting Port field, enter the starting port number for the service or application. The Internal Ending Port field is populated automatically. Internal IP address Either enter an IP address in the Internal IP address field or select the radio button for an attached device that is listed in the table. 9. Click the Apply button. Your settings are saved. The rule is added to the table on the Port Forwarding / Port Triggering page. Manage Port Forwarding and Port Triggering 191