Netgear R6900P User Manual - Page 196
Add Service, Apply, Description, Field, Service, Service User, Single address, Inbound Connection
View all Netgear R6900P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Nighthawk AC1900 Smart WiFi Router Model R6900P 6. Click the Add Service button. 7. Specify a new port triggering rule with a custom service or application as described in the following table. Field Description Service Service Name Service User Enter the name of the custom service or application. From the Service User menu, select Any, or select Single address and enter the IP address of one computer: • Any. This is the default setting and allows any computer on the Internet to use this service. • Single address. Restricts the service to a particular computer. Enter the IP address in the field that becomes available with this selection from the menu. Service Type Select the protocol (TCP or UDP) that is associated with the service or application. Triggering Port Enter the number of the outbound traffic port that must open the inbound ports. Inbound Connection Connection Type Select the protocol (TCP or UDP) that is associated with the inbound connection. If you are unsure, select TCP/UDP. Starting Port Enter the start port number for the inbound connection. Ending Port Enter the end port number for the inbound connection. 8. Click the Apply button. Your settings are saved and the rule is added to the Port Triggering Portmap Table on the Port Forwarding / Port Triggering page. Manage Port Forwarding and Port Triggering 196