Netgear RN3138 Software Manual - Page 114
Optional Select the, Password, Require initiators to identify themselves using CHAP, Apply
![]() |
View all Netgear RN3138 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
ReadyNAS OS 6.4 The IQN is added to the table on the LUN group properties window. 4. Configure the LUN group settings. Note If you are connecting to a LUN group using a Windows device, make sure that you leave the Password for bidirectional CHAP authentication fields blank. a. In the Allowed column of the initiator table, select the check box next to the initiator that you created in Step 3 on page 112. The initiator is allowed to access the LUN group. b. (Optional) Select the Require initiators to identify themselves using CHAP check box. Selecting this check box allows only authenticated initiators to access LUNs in the LUN group. To gain access, initiators must provide the CHAP password that you created in Step 3 on page 113. c. Click the Apply button. The new LUN group properties take effect immediately. LUNs 114
![](/manual_guide/products/netgear-rn102-software-manual-274ff48/114.png)