Netgear RN3138 Software Manual - Page 188
SNMP Monitoring, Con SNMP
![]() |
View all Netgear RN3138 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
ReadyNAS OS 6.4 SNMP Monitoring Use SNMP management systems such as HP OpenView or CA UniCenter for remote monitoring of the ReadyNAS. (Management over SNMP is not supported.) Configure SNMP To configure SNMP: 1. Log in to your ReadyNAS. 2. Select System > Settings > Services. 3. Click the SNMP button. 4. Configure the settings as explained in the following table: Item Description Enable SNMP Community Trap Destination Hosts Allowed Access Select the check box to enable SNMP globally. Clear the check box to disable SNMP globally. Enter the community. Normally, you would enter public for a read-only community and private for a read/write community. You can leave the Community field set to public (which is the default setting) or you can specify a private name if you have a more segregated monitoring scheme. Enter the IP address to which the ReadyNAS sends the traps that it generates. For information about the types of messages that the ReadyNAS sends, see System Logs on page 185. Enter a network address that specifies the hosts that are allowed to access the ReadyNAS. 5. Click the Apply button. Your settings are saved. System Maintenance 188
![](/manual_guide/products/netgear-rn102-software-manual-274ff48/188.png)