Netgear RN3138 Software Manual - Page 26
Change From Flex-RAID to X-RAID, Volume Configuration, ReadyNAS OS 6.4
![]() |
View all Netgear RN3138 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
ReadyNAS OS 6.4 To change from X-RAID to Flex-RAID: 1. Log in to the local admin page. 2. Select System > Volumes. 3. Click the X-RAID button at the right side of the page. 4. Confirm that you want to switch from X-RAID to Flex-RAID. The volume switches from X-RAID mode to Flex-RAID mode and the indicator on the X-RAID button turns gray. The RAID level is automatically assigned based on the number of disks that are installed. Change From Flex-RAID to X-RAID If your system contains only one volume, you can easily switch from Flex-RAID to X-RAID. Data on the Flex-RAID volume is preserved when you switch to X-RAID. If your system contains multiple volumes, you must first reconfigure your disks into a single volume. Note When you switch to X-RAID mode, any extra disks installed in your system are automatically reformatted and used for storage expansion.You cannot change the RAID mode of a RAID 0 or RAID 10 volume. Volume Configuration 26
![](/manual_guide/products/netgear-rn102-software-manual-274ff48/26.png)