Netgear RN3138 Software Manual - Page 202

ReadyNAS OS 6.4 Item SNMP UPS only Address Community MIB Remote UPS only Address User Password 6. Click the Add button. The UPS is added to the UPS list. Description Enter the IP address of the SNMP UPS. Enter public or private, depending on the manufacturer's requirement or the UPS's configuration. From the drop-down list, select the MIB for one of the following manufacturers: • MGE UPS Systems • American Power Conversion (APC) • SOCOMEC • Powerware • Eaton Powerware (Monitored) • Eaton Powerware (Managed) • Raritan • BayTech • HP/Compac AF401A • Cyberpower RMCARD201/RMCARD100/RMCARD202 Enter the IP address of the remote UPS. For a remote UPS that is attached to a Linux server that is running NUT, enter the user name used to access the remote UPS. For a remote UPS that is attached to a ReadyNAS, enter monuser. This user name is required for the ReadyNAS to access the remote UPS; do not enter another user name. For a remote UPS that is attached to a Linux server that is running NUT, enter the password used to access the remote UPS. For a remote UPS that is attached to a ReadyNAS, enter pass. This password is required for the ReadyNAS to access the remote UPS; do not enter another password. Monitor a UPS To monitor the status of a UPS: 1. Log in to your ReadyNAS. 2. Select System > Power. When the ReadyNAS system detects the UPS device, it displays the following information about the device in the UPS list: System Maintenance 202