Netgear RN3138 Software Manual - Page 158

ReadyNAS OS 6.4 4. Click the Settings button in the pop-up menu. A window displays the settings for the selected Ethernet interface. 5. Click the General tab and configure the settings as explained in the following table: Item Description Name Bandwidth (Mbps) MTU Cannot be edited. Displays the name of the Ethernet interface. Cannot be edited. Displays the bandwidth of the Ethernet interface. Enter the MTU in bytes. The default setting is 1500 bytes. 6. Click the IPv4 tab. 7. Configure the IPv4 settings as explained in the following table. Note We recommend that you use DHCP address reservation to make sure that the DHCP server always assigns the same IP address to the interfaces of the ReadyNAS. The MAC addresses of the physical interfaces are shown on the Network page. Note If you enter an IP address manually, you must provide DNS server information if you want to access your ReadyNAS system over the Internet. For more information, see DNS on page 157. If the IP address changes, your browser loses its connection to your storage system. To reconnect to your ReadyNAS system, use ReadyCLOUD to rediscover your device. See Discover and Set Up Your ReadyNAS on page 13. System Settings 158