Netgear WAG102 WAG102 Reference Manual - Page 54
Logging In Using the Default, IP Address on Edit.
UPC - 606449028799
View all Netgear WAG102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g) To configure a security profile: 1. From your Web browser, log in to the WAG102 as described in "Logging In Using the Default IP Address" on page 2-11. 2. From the main menu under Security, select either Security Profile Settings 11a or Security Profile Settings 11b/g. The screen for the Profile Settings you selected will display as shown in Figure 2-13 above. 3. Check the radio button of the profile you want to modify and click Edit. The security profile configuration screen for the selected profile will display. 4. Give your profile a meaningful name so that you can remember it later. 5. The Wireless Network Name (SSID) is set by default to identify it as either a NETGEAR-11a or a NETGEAR-11g wireless network. 6. Enable or disable the Broadcast Wireless Network Name (SSID). It is enabled by default. (If it is broadcast, it can be easily detected by other clients.) Figure 2-14 7. From the pull-down menu shown in Figure 2-14, select the Network Authentication Type you want to use for this profile: 2-28 Basic Installation and Configuration v2.0, September 2006