Netgear WAG102 WAG102 Reference Manual - Page 91
Appendix A Default Settings and Technical Specifications, Factory Default Settings - login
UPC - 606449028799
View all Netgear WAG102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Appendix A Default Settings and Technical Specifications This appendix provides the factory default settings and technical specifications for the ProSafe 802.11a/g Dual Band Wireless Access Point WAG102. Factory Default Settings You can use the reset button located on the front of your device to reset all settings to their factory defaults. This is called a hard reset. • To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the TEST LED blinks rapidly). Your device will return to the factory configuration settings shown in Table A-1 below. • Pressing the reset button for a shorter period of time will simply cause your device to reboot. Table A-1. Access Point Default Configuration Settings Feature AP Login User Login URL User Name (case sensitive) Login Password (case sensitive) Ethernet Connection Ethernet MAC Address Port Speed Local Network (LAN) Lan IP Subnet Mask Gateway Address DHCP Server Description 192.168.0.232 admin password See bottom label. 10/100 192.168.0.232 255.255.255.0 0.0.0.0 Disabled Default Settings and Technical Specifications A-1 v2.0, September 2006