Netgear WAG102 WAG102 Reference Manual - Page 59
Configuring WPA and WPA2 with RADIUS, Under Security on the main menu
UPC - 606449028799
View all Netgear WAG102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g) 6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations. 7. Click Apply to save your settings. Configuring WPA and WPA2 with RADIUS Not all wireless adapters support WPA and WPA2. Client software is required on the client: • Windows XP and Windows 2000 with Service Pack 3, or above, do include the client software that supports WPA. The wireless adapter hardware and driver must also support WPA. • Service Pack 3 does not include the client software that supports WPA2. Make sure your client card supports WPA2. The wireless adapter hardware and driver must also support WPA2. Consult the product documentation for your wireless adapter; WPA client software for instructions on configuring WPA settings; and WPA2 client software for instructions on configuring WPA2 settings. Figure 2-18 To configure WPA and WPA2 with RADIUS: 1. Under Security on the main menu, select RADIUS Server Settings. The Select RADIUS Server Settings screen will display. 2. Enter the RADIUS settings as shown in ""Configuring the RADIUS Server Settings" on page 2-25. 3. Click Apply to save your RADIUS settings Basic Installation and Configuration v2.0, September 2006 2-33