Netgear WAG102 WAG102 Reference Manual - Page 68
Table 3-1. General Information Fields continued, Current IP Settings, Current Wireless Settings 11a - dhcp
UPC - 606449028799
View all Netgear WAG102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g) Table 3-1. General Information Fields (continued) Field Description VLAN (802.1Q) This option is only useful if the hubs/switches on your LAN support the VLAN (802.1Q) standard. If so, you can enable this feature, and define the VLAN IDs used for management and each security profile. The feature is enabled in the Basic Settings menu. Management VLAN ID If 802.1Q is enabled, this ID indicates the VLAN ID for management connections and traffic to and from this access point. This VLAN ID must be recognized, and handled appropriately, by other network devices. Current IP Settings IP Address Subnet Mask Default Gateway DHCP Client The IP address of the wireless access point. The subnet mask for the wireless access point. The default gateway for the wireless access point communication. Enabled indicates that the current IP address was obtained from a DHCP server on your network. Disabled indicated a static IP configuration. Current Wireless Settings 11a Access Point Mode Operating Mode Channel/Frequency Security Profiles Identifies the operating mode of the WAG102: Access Point, Point-to-point bridge, Multi-point bridge or Repeater. Identifies the 802.11 operating mode of the WAG102. Identifies the channel the wireless port is using. 52 is the default channel setting. (Channel frequencies used on each channel can be found in "Wireless Communications"; a link to this article is in Appendix B, "Related Documents".). There can be up to 8 profiles enabled, each with its own profile name, SSID, security type, and VLAN ID. Current Wireless Settings 11b/g Access Point Mode Identifies the operating mode of the WAG102: Access Point, Point-to-point bridge, Multi-point bridge or Repeater. Operating Mode Channel/Frequency Identifies the 802.11 operating mode of the WAG102. Identifies the channel the wireless port is using. 11 is the default channel setting. (Channel frequencies used on each channel can be found in "Wireless Communications"; a link to this article is in Appendix B, "Related Documents".) Security Profiles There can be up to 8 profiles enabled, each with its own profile name, SSID, security type, and VLAN ID. 3-4 Management v2.0, September 2006