Netgear WAG102 WAG102 Reference Manual - Page 65
Management, Remote Management
UPC - 606449028799
View all Netgear WAG102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 3 Management This chapter describes how to use the management features of your ProSafe 802.11a/g Dual Band Wireless Access Point WAG102. To access these features, connect to the WAG102 as described in "Logging In Using the Default IP Address" on page 2-11. Then select the category under either the Management or Information headings in the main menu of the browser interface. Remote Management SNMP is disabled by default. Enabling SNMP allows for remote management of the WAG102 from a from a client running SNMP Management software. To set up a Remote Management interface: 1. Under Management on the main menu, select Remote Management. The Remote Management screen will display. Figure 3-1 2. Enter the following information in the Remote Management fields: • SNMP: Enable SNMP to allow the SNMP network management software, such as HP OpenView, to manage the wireless access point via SNMPv1/v2 protocol. 3-1 v2.0, September 2006