Netgear XSM4324FS Hardware Installation Guide - Page 22
Table 1. LEDs of the full 10G models Continued, Hardware Installation Guide, Hardware Overview
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 1. LEDs of the full 10G models (Continued) LED Designation OOB Ethernet port LEDs (two LEDs per port) Left side speed LED: Off. No link is established on the port. Solid green. The port established a 1000 Mbps link. Solid yellow. The port established a 10 or 100 Mbps link. Right side activity and link LED: Off. No link is established on the port. Solid green. The port established a link. Blinking green. The port is transmitting or receiving packets. 10GBASE-X SFP+ port LED (one LED per port) Off. No SFP module link is established on the fiber port. Solid green. The fiber port established a 10 Gbps link. Blinking green. The fiber port is transmitting or receiving packets at 10 Gbps. Solid yellow. The fiber port established a 1 Gbps link. Blinking yellow. The fiber port is transmitting or receiving packets at 1 Gbps. Non-PoE models 10GBASE-T RJ45 port LED (one LED per port) Off. No link is established on the copper port. Solid green. The copper port established a 10 Gbps link. Blinking green. The copper port is transmitting or receiving packets at 10 Gbps. Solid yellow. The copper port established a 1 Gbps or 100 Mbps link. Blinking yellow. The copper port is transmitting or receiving packets at 1 Gbps or 100 Mbps. PoE model (M4300-16X) 10GBASE-T RJ45 port LEDs (two LEDs per ports) PoE model (M4300-16X), right side PoE status LED: Off. A PD is not connected to the port. Solid green. A PoE-powered device (PD) is connected and the port is supplying power successfully. Solid yellow. Indicates one of the following failures, which prevents the port from supplying power: • A short circuit occurred on the PoE power circuit. • The PoE power demand exceeds the available power. • The PoE current exceeds the PD's classification. • An out-of-proper-voltage band condition occurred. PoE model (M4300-16X), left side speed, activity, and link LED: Off. No link is established on the copper port. Solid green. The copper port established a 10 Gbps link. Blinking green. The copper port is transmitting or receiving packets at 10 Gbps. Solid yellow. The copper port established a 5 Gbps, 2.5 Gbps, 1 Gbps, or 100 Mbps link. Blinking yellow. The copper port is transmitting or receiving packets at 5 Gbps, 2.5 Gbps, 1 Gbps, or 100 Mbps. Hardware Overview 22 Hardware Installation Guide