Netgear XSM4324FS Hardware Installation Guide - Page 23

M4300 Intelligent Edge Series Fully Managed Stackable Switches Hardware descriptions, M4300 series 1G models with 10G uplinks This section describes the switch hardware features for the following 1G models with 10G uplinks: • M4300-28G. Switch model with twenty-four 1G copper ports, two 10G copper ports, and two 10G fiber ports • M4300-28G-POE+. Switch model with twenty-four 1G copper PoE+ ports, two 10G copper ports, and two 10G fiber ports • M4300-52G. Switch model with forty-eight 1G copper ports, two 10G copper ports, and two 10G fiber ports • M4300-52G-POE+. Switch model with forty-eight 1G copper PoE+ ports, two 10G copper ports, and two 10G fiber ports Front panel, M4300 series 1G models with 10G uplinks The 1G models with 10G uplinks provide twenty-four or forty-eight 1000BASE-T autosensing ports (depending on the model, either regular, non-PoE, ports or PoE+ ports), two dedicated 10GBASE-T ports, and two dedicated 10GBASE-X SFP+ ports. The following figure illustrates the front panel of full-width model M4300-28G. Model M4300-28G Figure 9. Front panel model M4300-28G Number 1 2 3 4 Hardware Overview Description Power 1, Power 2, and Fan LEDs Stack ID LED 10GBASE-T ports, each with a port LED OOB port with port LEDs 23 Hardware Installation Guide