Netgear XSM4324FS Hardware Installation Guide - Page 26

M4300 Intelligent Edge Series Fully Managed Stackable Switches Number 1 2 3 4 5 6 7 8 9 10 Description Power 1, Power 2, and Fan LEDs Stack ID LED 10GBASE-T ports, each with a port LED OOB port with port LEDs Stack Master LED Reset button Mini USB console port 1000BASE-T PoE+ ports, each with two port LEDs 10GBASE-X SFP+ ports, each with a port LED USB port Common components From left to right, the front panel of the full 1G models with 10G uplinks provides the following components: • Stack ID, Power 1, Power 2, Fan, Stack Master, and system LEDs (see LEDs, M4300 series 1G models with 10G uplinks on page 29). • Recessed Reset button. • One mini USB console port. • Depending on the model, twenty-four or forty-eight 10/100/1000 Mbps autosensing 1000BASE-T RJ-45 ports, each with a left LED and a right LED (see LEDs, M4300 series 1G models with 10G uplinks on page 29). • The LED functionality depends on the model: - Non-PoE models. On model M4300-28G and model M4300-52G, the left LED indicates the speed and the right LED indicates the activity. - PoE models. On model M4300-28G-POE+ and model M4300-52G-POE+, the left LED indicates the PoE status and the right LED functions as the combined speed and activity LED. • Two dedicated 10GBASE-T autosensing ports, each with a combined speed and activity LED (see LEDs, M4300 series 1G models with 10G uplinks on page 29): - On model M4300-28 and model M4300-28G-POE+, these are port numbers 25 and 26. - On model M4300-52G and model M4300-52G-POE+, these are port numbers 49 and 50. Hardware Overview 26 Hardware Installation Guide