Olympus D150 D-150/C-1 Zoom Reference Manual (2.7MB) - Page 47
Erasing All Pictures (All-Frame Erase
![]() |
View all Olympus D150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
47 VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING Erasing All Pictures (All-Frame Erase) The following operation clears the card of all stored image data. 1/3 NO OFF YES SELECT NO SET OK Playback mode menu 1/3 screen NO NO SELECT SET OK Card setup screen Operating Procedure Check that the lens barrier is closed and the camera is set to the Playback mode by holding down the monitor button for a moment. 1. Press the OK/menu button. 2. Press the or arrow pad key to select / . [The display changes to "YES". 3. Press the OK/menu button. [The card setup screen is displayed. 4. Select by pressing the or arrow pad key. YES NO Check the following before erasing images ⅷ Erasure is not possible if the image to be erased is protected or a write protect seal is attached to the card ( Pages 50, 51). ⅷ For details on handling your card, refer to the instructions provided with it. 5. Select "YES" by pressing the or arrow pad key. 6. Press the OK/menu button. [All of the image frame data saved in the card will be erased. To cancel all-frame erasure: In step 5, select "NO" and press the OK/menu button. Erasure time may be prolonged if the card has been subjected to print reservation ( Page 76). This is not a malfunction. To prevent destruction of data on the card, never attempt to open the card cover, remove the batteries, disconnect the AC adapter or remove the card during erasure.
![](/manual_guide/products/olympus-d150-d150c1-zoom-reference-manual-27mb-03f5fba/47.png)