Onkyo TX SR800 Owner Manual - Page 39

Setup Menu When making the various settings required to configure your TX-SR800 for optimum performance, you can either use the OSD Menu that appears on your television monitor or you can use the display on the front of the TX-SR800. The OSD Menu is a settings menu that is displayed on your TV monitor. For your reference when performing the setting procedures, this manual shows both the OSD Menu displayed on your television monitor and the display on the front of the TX-SR800. The Setup Menu consists of the Basic Menu that is divided up into 4 menus, the Hardware Setup Menu, Speaker Setup Menu, Input Setup Menu, and Audio Adjust Menu, and the Advanced Menu that contains the menus of the Basic Menu plus the Preference Menu. These menus are then divided up into various sub-menus, and these contain settings for you to optimize your home theater as you wish. The display shown below is an example. The actual contents of your display may differ depending on the model of your region and the selected input source. 0.Hardware Setup Basic Menu Your TX-SR800 is provided with a Basic Menu for those who are not familiar with many of the advanced settings of an AV receiver or those who wish to watch movies and listen to music with the minimal amount of setup. With the Basic Menu, the settings that rarely need to be set or that are only needed for advanced fine-tuning of the sound quality are not displayed. Basic Menu 0.Hardware Setup 1.Speaker Setup 2.Input Setup 3.Audio Adjust →Advanced Menu |ENTER|Quit:|SETUP| 1.Speaker Impedance 2.Surr Back/Zone2 3.IR IN Setup |ENTER|Quit:|SETUP| 1.Speaker Setup 1.Speaker Config 2.Speaker Distance 3.Level Calibration |ENTER|Quit:|SETUP| 2.Input Setup Input:DVD 1.Digital Setup 2.Multichannel Setup 3.Video Setup 4.Character Input 5.IntelliVolume |ENTER|Quit:|SETUP| 3.Audio Adjust Note: Once you complete the settings in the Hardware Setup Menu, the menu will not appear again when you enter the Basic Menu. 1.Tone Control 2.Surround Speakers 3.Sound Effect →default Advanced Menu The Advanced Menu provides features such as the Listening Mode Presets that allow you to customize the output sound for movies and music just the way you like and the AV Sync Setup that allows you to adjust for discrepancies between the video and audio timing. Settings listed with next to their name are settings that can be set using the Advanced Menu. Advanced Menu 0.Hardware Setup 1.Speaker Setup 2.Input Setup 3.Audio Adjust 4.Preference →Basic Menu |ENTER|Quit:|SETUP| 0.Hardware Setup 1.Speaker Impedance 2.Surr Back/Zone2 3.IR IN Setup 4.AM Frequency Setup |ENTER|Quit:|SETUP| 1.Speaker Setup 1.Speaker Config 2.Speaker Distance 3.Level Calibration |ENTER|Quit:|SETUP| 2.Input Setup Input:DVD 1.Digital Setup 2.Multichannel Setup 3.Video Setup 4.Character Input 5.IntelliVolume 6.Listening Mode Preset |ENTER|Quit:|SETUP| 3.Audio Adjust 1.Tone Control 2.Surround Speakers 3.Sound Effect 4.Delay 5.LFE Level 6.Mono 7.Theater Dimensional 8.Surround 3.Audio Adjust 9.THX 10.Mono Movie 11.Enhanced 7 12.Orchestra 13.Unplugged 14.Studio Mix 15.TV Logic →default 4.Preference 1.Volume Setup 2.HeadphonesLeLveevlelSetup 3.OSD Setup 4.OSD Position |ENTER|Quit:|SETUP| 39