Onkyo TX SR800 Owner Manual - Page 67

Operating your programmed remote controller After entering a pre-programming by following the procedure given above, the following modes become enabled for use. DVD MODE (DVD Player Mode) Operations are the same as explained on page 62. ON ENTER, CH STANDBY SAT/MD MODE VOL MENU MUTING Numeric keys ENTER SAT MODE (Satellite Tuner Mode) 1. Press the SAT/MD MODE button. The SAT/MD MODE button lights. 2. Press the desired operation button. The buttons shaded in the figure to the left are the operation buttons that can be used to control your satellite tuner unit. The buttons given below have operations programmed into them. ON: Turns on and off satellite tuner unit (same as STANDBY button on the remote controller) CH : Changes selected preset channel : Moves cursor ENTER: Confirms selection MENU: Displays menu 0,1 to 9: Numeric keys ENTER: Confirm You may also use the following buttons: VOL : Adjusts the volume at the TX-SR800 MUTING: Activates the muting function at the TX-SR800 ON CH STANDBY CABLE MODE VOL MUTING CABLE MODE (Cable Mode) 1. Press the CABLE MODE button. The CABLE button lights. 2. Press the desired operation button. The buttons shaded in the figure to the left are the operation buttons that can be used to control your cable TV unit. The buttons given below have operations programmed into them. ON: Turns on and off cable TV unit (same as STANDBY button on the remote controller) CH : Changes selected preset channel 0,1 to 9: Numeric keys ENTER: Confirm You may also use the following buttons: VOL : Adjusts the volume at the TX-SR800 MUTING: Activates the muting function at the TX-SR800 Numeric keys ENTER 67