Onkyo TX SR800 Owner Manual - Page 62

Using remote controller ON RETURN ENTER, DISC TOP MENU AUDIO SEL ANGLE STANDBY DVD MODE SETUP VOL MENU MUTING SUBTITLE DVD operation buttons Numeric keys SEARCH Controlling an Onkyo DVD player The connector of the Onkyo DVD player must be connected to the TX-SR800 (see page 26). 1. Press the DVD MODE button. The DVD MODE button lights. 2. Press the desired operation button. The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo DVD player. Operation buttons: ON: Turns DVD player on and off STANDBY: Turns DVD player off (Some sets may not respond to this button. In this case, use the ON button to put the DVD player in the standby state.) SETUP: Displays the OSD of the DVD player : Moves cursor in the OSD Menu of the DVD player ENTER: Enter button for the OSD Menu of the DVD player RETURN: Return button for the OSD Menu of the DVD player TOP MENU or MENU: Displays menu screens recorded on DVD media DISC : Selects disc in DVD changer AUDIO SEL: Selects audio or language track (if recorded on the DVD) ANGLE: Selects a camera angle (if recorded on the DVD) SUBTITLE: Selects subtitle language (if recorded on the DVD) SEARCH: Searches for location on disc to start playback RANDOM: Random playback : Chapter/Track down : Chapter/Track up : Play : Stop : Fast reverse : Fast forward : Pause : Opens/closes the disc tray 0, 1 to 9, +10: Numeric keys You may also use the following buttons: VOL : Adjusts volume at TX-SR800 MUTING: Activates muting function at TX-SR800 Note: When operating an Onkyo DVD player directly with the remote controller without connecting the terminals, pre-programming is necessary (see page 65). 62