Onkyo TX SR800 Owner Manual - Page 43

Speaker Setup 1. Speaker Setup Menu After you have installed the TX-SR800, connected all the components, and determined the speaker layout, it is now time to perform the settings in the Speaker Setup Menu for the optimum sound acoustics for your environment and speaker layout. Before you perform the following settings, it is important that you first determine the following items: • The types and sizes of the speakers that are connected. • The distance from each speaker to the normal listening position. Advanced Menu 1.Speaker Setup 1.Speaker Config 2.Speaker Distance 3.Level Calibration |ENTER|Quit:|SETUP| Memo: Monitor Front SW Center [ ] m/ft [ ]m/ft Front [ ]m/ft [ ]m/ft SL [ ]m/ft SR [ ]m/ft [ ]m/ft SBL [ SBR ]m/ft Note: When "Large" is set, the complete frequency range for that speaker channel will be output. When "Small" is set, the frequencies below 80 Hz for that speaker channel are output to the subwoofer. If there is no subwoofer, then they will be output to the left and right front speakers. (Set all speakers for THX speaker systems to "small.") 1-1. Speaker Config Sub-menu Use this sub-menu to enter which speakers are connected and the size of each speaker. Advanced Menu 1.Speaker Setup 1-.1S.pSepaekaekrerCoCnofnifgig 2.Speaker Distance 3.Level Calibration 4a..BSausbswoPoefaekrLev:eYles b.Front L/R :Small c.Center :Small d.Surr L/R :Small e.Surr Back :Small f.Cro|sEsNoTvEeRr|:8Q0uHizt(:T|HOXS)D| Quit:|SETUP| a. Subwoofer Yes: Select when a subwoofer is connected. No: Select when a subwoofer is not connected. b. Front L/R Large: Select if the front speakers are large sized. Small: Select if the front speakers are small sized. • If "No" is selected for the Subwoofer setting, this setting is fixed to "Large." c. Center None: Select if no center speaker is connected. Large: Select if the center speaker is large sized. Small: Select if the center speaker is small sized. • If "Small" is selected for the Front setting, "Large" cannot be selected for this setting. d. Surr L/R None: Select if no surround left and right speakers are connected. Large: Select if the surround left and right speakers are large sized. Small: Select if the surround left and right speakers are small sized. • If "Small" is selected for the Front setting, "Large" cannot be selected for this setting. e. Surr Back None: Select if no surround back left and right speakers are connected. Large: Select if the surround back left and right speakers are large sized. Small: Select if the surround back left and right speakers are small sized. • If "None" is selected for the Surround L/R setting, this setting will not appear. • If "Small" is selected for the Surround L/R setting, "Large" cannot be selected for this setting. • If the Surr Back/Zone 2 setting in the Surr Back/Zone 2 Submenu of the Hardware Setup Menu is set to "Zone 2," this setting will not appear. f. Crossover This setting allows you to set the crossover frequency for your speaker system. The crossover frequency is the minimum frequency delivered to a speaker and can be set to 40 Hz, 60 Hz, 80 Hz (THX), 100 Hz, or 120 Hz. Select 80 Hz (THX) if you are using a THXcertified speaker system. This setting is valid when "Subwoofer" is set to "Yes," or for speakers that are set to "Small," at the "Speaker Config" menu. Frequencies below this are cut from speakers set to "Small" and sent to the subwoofer (or to speakers set to "Large"). 43