Onkyo TX SR800 Owner Manual - Page 57
3-12. 3-13. 3-14. 3-15., Mono Movie/Enhanced 7/Orchestra/Unplugged, Studio Mix /TV Logic
UPC - 751398004926
View all Onkyo TX SR800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Audio Adjust 3-9. THX Sub-menu This sub-menu allows you to set the settings that will be enabled when the THX listening mode is selected. The settings available are shown in the table below. Setting a. Re-EQ (THX) b. Decoder (2 ch) c. THX Surr EX (Dolby D) d. DTS-ES Values Off, On PL II Movie Neo:6 Cinema Auto, Off, On Auto, Off, On Initial value On PL II Movie On Auto a. Re-EQ (THX) Re-EQ (re-equalization) takes the edginess or "brightness" out of your home cinema sound to compensate for the fact that sound mixed for theaters may sound too bright when played back through speakers in the home environment. This can be set to either "On" or "Off". b. Decoder (2 ch) This setting allows you to select the decoding mode for THX processing. PL II: Select for Dolby Pro Logic II Movie. Neo:6: Select for DTS Neo:6 Cinema. c. THX Surr EX (Dolby D) This setting allows you to set whether or not Dolby Digital sources will be played back using THX Surround EX when a surround back speaker is connected. Auto: Select to automatically output sources with EXidentifying signals using THX Surround EX. On: Select to output using THX Surround EX regardless of whether or not the source contains EX identifiers. Off: Select not to output using THX Surround EX regardless of whether or not the source contains EX identifiers (Dolby D is used). Note: THX Surr EX (Dolby D) will not appear if the Surr Back/Zone 2 setting in the Surr Back/Zone 2 Sub-menu of the Hardware Setup Menu is set to "Zone 2" and the Surr Back setting in the Speaker Config Sub-menu of Speaker Setup menu is set to "None." d. DTS-ES This setting selects the DTS-ES mode. Auto: Select to have the listening mode change automatically to DTS-ES Discrete 6.1 or DTS-ES Matrix 6.1. If the DTS source has no DTS-ES flag, the mode is changed to DTS 5.1. On: Select to have the listening mode change automatically to DTS-ES Discrete 6.1 or DTS-ES Matrix 6.1 when the DTS source has the DTS-ES flag, and to DTS-ES Matrix 6.1 when the DTS source has no DTS-ES flag. Off: Select to not use DTS-ES listening modes even when the DTS source has the DTS-ES flag. With this setting, the DTS sources are always played in DTS 5.1 mode. 3-10. 3-11. 3-12. 3-13. 3-14. 3-15. Mono Movie/Enhanced 7/Orchestra/Unplugged/ Studio Mix /TV Logic Sub-menu The settings of these sub-menus become effective when any of the Mono Movie, Enhanced 7, Orchestra, Unplugged, Studio-Mix, or TV Logic listening modes are selected. When one of the listening modes is selected, the settings in the sub-menu of that listening mode become enabled. Setting a. Front Effect b. Reverb Level c. Reverb Time Values Off, On Low, Mid, High Short, Mid, Long Initial value On Mid Mid a. Front Effect Some live recordings contain acoustic reverberation. When you play these sources, more reverberation will be applied by the DSP, creating too much reverb effects and the sound loses frame or presence. In this case, set this setting to "Off" so that no reverberation from the DSP will be applied to the sound output from the three front channels. With this setting, the sound source is played as it is without any further reverberation. b. Reverb Level This setting allows you to adjust the depth of acoustic reverberation to match the playback source material, the acoustics of your room, and such other factors. Select from the three settings "Low," "Mid," and "High." c. Reverb Time Adjust the reverb time to match the source being played back and the acoustics of the room. Select from the three settings "Short," "Mid," and "Long." 57