Panasonic AJSPX800P AJSPX800 User Guide - Page 110

8-6-6 TC/UB Items/ Adjustable Data Saved Range Remarks TC MODE DF NDF -CUF - Set the time code mode. DF: Drop frame. NDF: Non drop frame. UB MODE USER TIME DATE EXT TCG FRM RATE REGEN -CUF - Select the user bits mode. USER:Select UB value set in the LCD section. TIME: Select local time (hours, minutes, seconds). DATE: Select local date and time (2 last digits of year, month, date, time). EXT: Slaved to UB from TC-IN. If reading fails, USER value is retained. TCG: TCG value enters UB. FRM RATE: Select same camera shoting information (frame rate, etc.) with the VAUX UB (VITC UB). REGEN:Read out value stored in the card and record value continuously. VITC UB MODE USER/EXT TIME DATE TCG FRM RATE REGEN -CUF - Select the user bits mode for VAUX TC (VITC). USER/EXT: If UB MODE is set to EXT, the EXT value is recorded. If not, USER value set by UB is recorded. TIME: Select local time (hours, minutes, seconds). DATE: Select local date and time (2 last digits of year, month, date, time). TCG: TCG value enters UB. FRM RATE: Select same camera shoting information (frame rate, etc.) with the VAUX UB (VITC UB). REGEN:Read out value stored in card and record value continuously. TCG SET HOLD ON OFF -CUF - ON/OFF switching for the feature that always starts recording (when the power is turned ON again) the TCG value that was set before the power is turned OFF. FIRST REC TC REGEN PRESET -CUF - For the first recording after the power is turned on, a P2 card is inserted and then switching from this P2 card to another recording-target P2 card is performed, select whether or not to regenerate the time code as the value on the new P2 card. REGEN:For clips recorded on the recording- target P2 card, regenerate the time code as the time code of the clip that has the most recent date and time. PRESET: Use the camera-recorder's internal time code. Set the date and time accurately. For guidance on setting, see [4-5-2 Setting the Internal Clock's Date and Time]. P.OFF LCD ON DISPLAY OFF -CUF - Select whether or not to display the time code setting and counter indication on the LCD monitor when the power is turned OFF. ON: Display setting and indication while the power is turned OFF. OFF: Power-down LCD monitor while camera power is turned OFF. Setting and indication disabled. Items/ Adjustable Data Saved Range Remarks TC OUT TCG TCG/TCR -CUF - Select the time code to be output to the time code output connector. TCG: Always output time code generator value. TCG/TCR: Display time code generator value in E-E mode, and time code reader value in V-V mode. TC DISP SEL 30F 24F -CUF - Select the display format for the time code frame digits. 30F: Display time code frame digits in 30 frames. 24F: Convert time code frame digits into 24 frames for display. 8-6-7 UMID SET/INFO Items/ Adjustable Data Saved Range Remarks COUNTRY NO-INFO Input the user's country. NO-INFO is displayed until the input completes. -CUF - ORGANIZATION NO-INFO -CUF - Input the user's organisation or company name. NO-INFO is displayed until the input completes. USER NO-INFO Input the user name. NO-INFO is displayed until the input completes. -CUF - DEVICE NODE Indicate the product ID number. ----- Please refer to [4-5-6 Setting the UMID Information] for the UMID information setting. The ____ in the Adjustable Range column indicates the preset mode. 110