Panasonic AJSPX800P AJSPX800 User Guide - Page 96

High Setting, Additional Dtl

Get Panasonic AJSPX800P - P2 CAMCORDER PDF manuals and user guides View all Panasonic AJSPX800P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 96 highlights

8-3-6 HIGH SETTING 8-3-7 ADDITIONAL DTL Items/ Adjustable Data Saved Range Remarks „MASTER -3dB GAIN : 18dB : S C U F E 30dB Select the master gain from -3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, or 30dB. H.DTL LEVEL 00 : 12 : S C U F E 63 Set H.DTL. V.DTL LEVEL 00 : 17 : S C U F E 31 Set V.DTL LEVEL. DTL CORING 00 : 08 : S C U F E 15 Set DTL CORING. H.DTL FREQ. 00 : 20 : S C U F E 31 Set a frequency (DTL width) at which H.DTL is added. The greater the value, the higher the frequency (the narrower the DTL). LEVEL 0 DEPEND.) : 3 : 5 SCU F E Set LEVEL DEPEND. No DTL is added to the portion whose brightness is the setting value or less. When the GAMMA MODE SEL item is set to STD, each setting value represents brightness levels, as follows: 0 = about 0%, 1 = about 4%, 2 = about 8%, 3 = about 12%, 4 = about 16%, 5 = about 20%. MASTER 0.35 GAMMA : 0.55 : S C U F E 0.75 Set MASTER GAMMA in 0.01 steps. BLACK -3 STRETCH : OFF : S C U F E +3 Set the gamma curb for dark spots. „MATRIX OFF TABLE A S C U F EB Select the color correction table. „COLOR ON CORRECT OFF Set the color correction to ON or OFF. SCU F E Items/ Adjustable Data Saved Range Remarks KNEE APE LVL OFF 1 2 S C U F E : 5 CHROMA DTL OFF 0 : 5 SCU F E Set KNEE APE LEVEL. Set the chroma detail. Detects the chroma edge and superimposes it on Y to enhance H.DTL. A greater value increases the correction. DTL GAIN(+) -31 : +00 : S C U F E +31 Adjust the detail level toward + (upwards). DTL GAIN(-) -31 : +00 : S C U F E +31 Adjust the detail level toward the - (downwards). DTL CLIP 00 : 63 SCU F E Adjust the detail signal clip towards the + direction. DTL SOURCE (R+G)/2 (G+B)/2 2G+R+B /4 (3G+R)/4 R S C U F EG Set the signal source for detail signal components. H.DTL LINE MIX 1H 2H Set the scan line to generate the H.DTL signal. SCU F E „CORNER DTL ON OFF SCU F E ON/OFF switching for CORNER DTL mode, which enhances the resolution around the screen perimeter. The items indicated by „ are the setting items for PAINT MENU SW(„) R/W in the screen. The items without „ are the setting items for PAINT MENU LEVEL R/W. Please refer to [8-7-2 SD CARD R/W SELECT] for more information. The ____ in the Adjustable Range column indicates the preset mode. 96

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
96
8-3-6
HIGH SETTING
8-3-7
ADDITIONAL DTL
<Note>
The items indicated by
are the setting items for PAINT MENU
SW(
) R/W in the <SD CARD R/W SELECT> screen. The items
without
are the setting items for PAINT MENU LEVEL R/W.
Please refer to [8-7-2 SD CARD R/W SELECT] for more
information.
The ____ in the Adjustable Range column indicates the preset
mode.
Items/
Data Saved
Adjustable
Range
Remarks
MASTER
GAIN
–3dB
:
18
dB
:
30dB
Select the master gain from –3, 0, 3, 6, 9,
12, 15, 18, 21, 24, 27, or 30dB.
SCUFE
H.DTL LEVEL
00
:
12
:
63
Set H.DTL.
SCUFE
V.DTL LEVEL
00
:
1
7
:
31
Set V.DTL LEVEL.
SCUFE
DTL CORING
00
:
0
8
:
15
Set DTL CORING.
SCUFE
H.DTL FREQ.
00
:
20
:
31
Set a frequency (DTL width) at which H.DTL
is added. The greater the value, the higher
the frequency (the narrower the DTL).
SCUFE
LEVEL
DEPEND.)
0
:
3
:
5
Set LEVEL DEPEND.
No DTL is added to the portion whose
brightness is the setting value or less.
When the GAMMA MODE SEL item is set to
STD, each setting value represents
brightness levels, as follows: 0 = about 0%,
1 = about 4%, 2 = about 8%, 3 = about 12%,
4 = about 16%, 5 = about 20%.
SCUFE
MASTER
GAMMA
0.35
:
0.
5
5
:
0.75
Set MASTER GAMMA in 0.01 steps.
SCUFE
BLACK
STRETCH
–3
:
OFF
:
+3
Set the gamma curb for dark spots.
SCUFE
MATRIX
TABLE
OFF
A
B
Select the color correction table.
SCUFE
COLOR
CORRECT
ON
OFF
Set the color correction to ON or OFF.
SCUFE
Items/
Data Saved
Adjustable
Range
Remarks
KNEE APE LVL
OFF
1
2
:
5
Set KNEE APE LEVEL.
SCUFE
CHROMA DTL
OFF
0
:
5
Set the chroma detail.
Detects the chroma edge and superimposes
it on Y to enhance H.DTL. A greater value
increases the correction.
SCUFE
DTL GAIN(+)
–31
:
+00
:
+31
Adjust the detail level toward + (upwards).
SCUFE
DTL GAIN(–)
–31
:
+00
:
+31
Adjust the detail level toward the –
(downwards).
SCUFE
DTL CLIP
00
:
63
Adjust the detail signal clip towards the +
direction.
SCUFE
DTL SOURCE
(R+G)/2
(G+B)/2
2G+R+B /4
(3G+R)/4
R
G
Set the signal source for detail signal
components.
SCUFE
H.DTL LINE MIX 1H
2H
Set the scan line to generate the H.DTL
signal.
SCUFE
CORNER DTL ON
OFF
ON/OFF switching for CORNER DTL mode,
which enhances the resolution around the
screen perimeter.
SCUFE