Panasonic AJSPX800P AJSPX800 User Guide - Page 53
Menu-driven Function Setup
View all Panasonic AJSPX800P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
4-9 Menu-driven Function Setup 4-9-2 Selecting Video Output Signals Each function is set up using the menu system. You need to select the signals to be output from the VIDEO OUT and MON OUT connectors. 4-9-1 Setting the Switchover of USER SW GAIN When the extension board AJ-YA902AG (optional accessory) is attached, an SDI signal can be output from the VIDEO OUT In addition to the standard L/M/H gain mode, the AJ-SPX800P supports S.GAIN (super gain) mode, featuring greater than 30- connector. For more information, see [8-2-4 OUTPUT SEL]. dB analog gain-up, together with DS.GAIN (digital super gain) mode, storage-type gain-up based on progressive drive 2873876(/! technology. 9,'(22876(/9%6 To make use of this feature, you need to specify desired gains through the menu options S.GAIN and DS.GAIN. 287387&+$50(1821/< 021,725287&+$52)) /&'021&+$521 4 9)02 3% For example, if the S.GAIN and DS.GAIN features are assigned 7+80%1$,/2872)) to either the USER MAIN, USER1 or USER2 buttons, three different gain-up modes are available through button-mode combinations. The menu options can be found in the screen, which is accessible from the CAM OPERATION page. 1) To increase the gain without increasing noise: Combine the L/M/H gain and DS.GAIN features. 2) To increase the normal analog gain: (noise is increased) Use the S.GAIN feature alone. 3) To achieve ultra-high sensitivity: Combine the S.GAIN and DS.GAIN features.(Gain increased by up to 68 dB.) However, you should be extra careful when using this combination. With moving subjects, the greater the increase in DS.GAIN the more annoying the after-images will be. In this case, limit the increase to +12dB (1/15). Note that the DS.GAIN feature is disabled when the AJSPX800P is in progressive mode. 86(56:*$,1! 6*$,1 _E% _E% _E% _E% '6*$,1 _E E E% 4-9-3 Selecting Function for the FRONT AUDIO LEVEL Control The FRONT AUDIO LEVEL control can be assigned the function of adjusting the recording level. To specify whether or not the FRONT AUDIO LEVEL control is effective on the channels set to accept input signals, use the menu options FRONT VR CH1 and FRONT VR CH2. These options can be found in the screen, which is accessible from the MAIN OPERATION page. For more information, see [8-6-4 MIC/AUDIO1]. 0,&$8',2! )521795 2)) )521795 2)) 0,&/2:&87&+2)) 0,&/2:&87&+2)) 0,&/2:&87&+2)) 0,&/2:&87&+2)) /,0,7(5 2)) /,0,7(5 2)) $872/(9 21 $872/(9 21 5 6: 05(&&+6 7(67721 1250$/ Settings Options and Usage S.GAIN: DS.GAIN: Analog gain-ups with _ marks enabled. Analog gain-ups without _ marks disabled. Storage-type gain-ups with _ marks enabled. Storage-type gain-ups without _ marks disabled. 53